15-5PHDownload 15-5PH Spec sheet
ExELL 15-5 PH Stainless Mold Steel
ExELL 15-5 PH was developed by Ellwood Specialty Steel as a premium quality mold steel. ExELL 15-5 PH is a martensitic precipitation hardening stainless steel with certain advantages over conventional stainless mold steels. Some of these characteristics include:
- Superior corrosion resistance
- Simple heat treatment
- Uniformity of mechanical properties
- Easy to weld
- Excellent polishability
- Good dimensional stability
- Very good toughness
ExELL 15-5 PH is used in various tooling and engineered parts. Some typical applications are:
- Injection molds for various plastics and rubbers
- Medical and food industry tooling
- Extrusion dies
- Compression molds
- Plastic processing equipment
- Manifold parts
- Glass molds
- Engineered components
Coefficient of Thermal Expansion, in/in/F
400 F ___________ 0.000006
Thermal Conductivity, BTU in/ft2 hr F
70 F ___________ 130
400 F __________ 155
70 F ___________ 0.283
Modulus of Elasticity, psi
70 F ___________ 29,000,000
400 F __________ 27,700,000
Specific heat, Btu/lb F
70 F ___________ 0.11
|Condition||Aging Temp||Hardness (HRC)|
Aging is performed by uniformly heating to the aging temperature, equalizing temperature from surface to center, holding 4 hours at temperature and air cooling. Slight shrinkage will occur after aging on the order of about 0.0005 to 0.0010 inches per inch.
Most aging is accomplished by using a 975°F age or higher. A 975°F aging treatment is used for a certain balance of hardness and toughness while higher temperature aging treatments will improve toughness and minimize over-aging if higher service temperatures are encountered.
|FEATURE Typical Hardness||P-20
|420F.m320 HB||S-755 HRC||H-1352 HRC||42050 HRC||15-5PH40 HRC|
*Machinability of P-20, Holder, 420F and 15-5PH is rated in the pre-hardened condition. S-7, H-13 and 420 are rated in the annealed condition. Overall ratings are 1-10 where 1 is the lowest rating.
Ellwood Specialty Steel is a fully integrated producer of a wide range of specialty tool steels.
Our ExELL grades are made with the advanced ASEA-SKF steel making capabilities which include an ultra high powered electric arc furnace with subsequent state of the art ladle refining and vacuum degassing equipment for the most complete and modern ladle metallurgy technology.
Our steel making expertise and capability is further enhanced from a long forging history with optimum forging and heat treating practices to develop very special material characteristics of product uniformity, cleanliness, machinability, polishability, strength, toughness, hardenability and other steel properties. All this from production facilities certified to ISO 9002.
Ellwood Specialty Steel is committed to providing products and services which will consistently meet or exceed all quality and performance expectations. We will provide customer and technical service that will ensure complete satisfaction.
Being a very flexible provider,Ellwood Specialty Steel will establish product programs to fully support industry or customer requirements. Our extensive stock programs are supported by very short mill lead times of custom forged products. Customized stock programs are and can be available for specific customer needs.
This information is intended to provide general data on our products and their uses and is based on our knowledge at the time of publication. No information should be construed as a guarantee of specific properties of the product described or suitability for a particular application. Ellwood Specialty Steel reserves the right to make changes in practices that may render some information outdated or obsolete. Ellwood Specialty Steel should be consulted for current information and/or capabilities.